RSX L4-2.0L (2005)
Alarm System Transponder: Service and Repair
Immobilizer Control Unit-Receiver Replacement
1. Remove the driver's dashboard lower cover.
2. Remove the steering column covers.
3. Disconnect the 7P connector (A) from the immobilizer control unit-receiver (B).
4. Remove the two screws and the immobilizer control unit-receiver from the ignition key cylinder (C).
5. Install the immobilizer control unit-receiver in the reverse order of removal.
6. After replacement, rewrite the unit with the HDS, then check the immobilizer system.
