RSX L4-2.0L (2005)
Rear Bumper: Service and Repair
Rear Bumper Removal/Installation
05-06 Models
NOTE:
-
Have an assistant help you when removing and installing the rear bumper.
-
Take care not to scratch the rear bumper and body.
-
Put on gloves to protect your hands.
1. Remove the rear bumper as shown.
2. Install the bumper in the reverse order of removal, and note these items:
-
Make sure the rear license light connector is plugged in properly.
-
Make sure the rear bumper engages the hooks of the side spacers and upper beams on both sides securely.
-
Replace any damaged or stress-whitened clips.
-
Push the clips into place securely.
