RSX L4-2.0L (2005)
Fuel Door Release Cable: Service and Repair
Fuel Fill Door Opener Cable Replacement
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the body and related parts.
1. Remove these items from the left side of the vehicle:
-
Rear side trim panel
-
Cargo area side trim panel
2. Pull the carpet back as necessary.
3. Disconnect the fuel fill door opener cable (A) from the opener (B)
4. Remove the opener cable from the clips (C). Remove the cushion tape (D).
5. Remove the fuel fill door latch (E) from the body by turning it 90 °.
6. Remove the opener cable from the vehicle. Take care not to kink the cable.
