RSX L4-2.0L (2005)
Keyless Entry Transmitter: Testing and Inspection
Transmitter Test
NOTE:
-
If the doors unlock or lock with the transmitter, but the LED on the transmitter does not come on, the LED is faulty; replace the transmitter.
-
If any door or the hatch is open, you cannot lock the doors with the transmitter.
-
If you unlocked the doors with the transmitter, but do not open any of the doors within 30 seconds, the doors relock automatically.
-
The doors do not lock or unlock with the transmitter if the ignition key is inserted in the ignition switch.
1. Open the transmitter and check for water damage.
-
If you find any water damage, replace the transmitter.
-
If there is no water damage, go to step 3.
2. Replace the transmitter battery (A) with a new one, and try to lock and unlock the doors with the transmitter.
-
If the doors lock and unlock, the transmitter is OK.
-
If the doors don't lock and unlock, go to step 3.
3. Reprogram the transmitter, then try to lock and unlock the doors.
-
If the doors lock and unlock, the transmitter is OK.
-
If the doors don't lock and unlock, replace the transmitter.
