RSX L4-2.0L (2005)
7. Remove the three screws and the actuator (A).
8. Route the wire harness (A) of the new actuator through the hole in the bracket (B) and gasket (C).
9. Install the actuator, bracket, harness clip, and gasket in the reverse order of removal.
10. Insert the new actuator terminals into the connector in the original arrangement.
11. Apply tape to seal the intersection of the wire harness.
12. Reassemble in the reverse order of disassembly Be careful not to break the mirror when reinstalling it to the actuator.
13. Reinstall the mirror assembly on the door.
14. Operate the power mirror to ensure smooth operation.