RSX L4-2.0L (2005)
5. Put on gloves to protect your hands. From the motor bracket portion and both guide rail portions, remove the screws (A, B) and nuts (C), then
remove the guide rails (D), grommets (E), and cable assembly (F) from the frame (G). Take care not to bend the cable tubes (H).
6. From both sides, remove the anchor springs (A) and glass bracket (B), and slide cable assembly (C) rearward.
7. Remove the glass bracket (A), slider (B), lifter (C), and slide stop link (D) from the guide rail (E), and remove the inner cable end (F) from the
lifter.
