RSX L4-2.0L (2005)
4. Pull back the seat-back cover (A), and remove the clips (B).
5. Pull back the seat-back cover (A) all the way around. Remove the latch knob (B), and remove the latch collar (C) by pinching the end and pulling
it out.
6. Remove the seat-back cover.
7. Install the cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hook and
clips.
-
Replace any clips you removed with new ones. Install them with commercially available upholstery ring pliers.