RSX L4-2.0L (2005)
Power Door Lock Switch: Testing and Inspection
Door Lock Switch
Door Lock Switch Test
1. Remove the door panel.
2. Remove the two mounting screws and the door lock switch.
3. Check for continuity between the No. 1 and No. 2 terminals:
-
There should be continuity when the door lock switch is in the LOCKED position.
-
There should be no continuity when the door lock switch is in the UNLOCKED position.
4. Check for continuity between the No. 2 and No. 3 terminals:
-
There should be continuity when the door lock switch is in the UNLOCKED position.
-
There should be no continuity when the door lock switch is in the LOCKED position.
5. If the continuity is not as specified, replace the door lock switch.
