RSX L4-2.0L (2005)
Front Door Weatherstrip: Service and Repair
Front Door Weatherstrip
Door Weatherstrip Replacement
NOTE:
-
Take care not to scratch the door.
-
Use a clip remover to remove the clips.
1. At the A-pillar, remove the door checker mounting bolt (A).
2. Detach the clips (B), then remove the door weatherstrip (C).
3. Install the weatherstrip in the reverse order of removal, and note these items:
-
Replace any damaged or stress-whitened clips.
-
Make sure the weatherstrip is installed in the holder (D) securely.
-
Apply liquid thread lock to door checker mounting bolt before installation.
-
Check for water leaks
-
Test-drive and check for wind noise.
