RSX L4-2.0L (2005)
Brake Pedal Position Switch Clearance
1. Push in the brake pedal position switch until its plunger is fully pressed (threaded end (A) touching the pad (B) on the pedal arm). Then, turn the
brake pedal position switch 45° clockwise to lock it. The gap between the brake pedal position switch and the pad is automatically adjusted to 0.4
to 3.0 mm (0.016 to 0.118 inch) by locking the switch. Make sure the brake lights go off when the pedal is released.
2. Check the brake pedal free play as described.
