RSX L4-2.0L (2005)
Cruise Control Switch: Service and Repair
Set/Decel, Resume/Accel, Cancel Switch
Cruise Control Set/decel, Resume/accel, Cancel Switch Test/Replacement
SRS components are located in this area. Review the SRS component locations, and the precautions, and procedures, before performing repairs or
service.
1. Remove the two screws, then remove the switch.
2. Check for continuity between the terminals in switch position according to the table.
-
If there is continuity, and it matches the table, but switch failure occurred on the cruise control unit input test, check and repair the wire harness
on the switch circuit.
-
If there is no continuity in one or both positions, replace the switch.