RSX L4-2.0L (2005)
Radiator: Service and Repair
Radiator and Fan Replacement
1. Drain the engine coolant.
2. Remove the front bumper.
3. Disconnect the hood switch connector, then remove the A/C line bracket mounting bolt, intake air duct mounting bolt, and harness clamps.
4. Remove the upper bracket and cushion mounting bolts, then remove the bulkhead.
5. Remove the upper radiator hose and lower radiator hose.
6. Disconnect the fan motor connectors and radiator fan switch connector, then pull up the radiator.
7. Remove the fan shroud assemblies and other parts from the radiator.
8. Install the radiator in the reverse order of removal. Make sure the upper and lower cushions are set securely.
9. Fill the radiator with engine coolant, and bleed the air from the cooling system with the heater valve open.
