RSX L4-2.0L (2005)
Rocker Arm Assembly: Service and Repair
Rocker Arm and Shaft Disassembly/Reassembly
Rocker Arm and Shaft Disassembly/Reassembly
NOTE:
^
Identify parts as they are removed to ensure reinstallation in their original location.
^
Inspect the rocker shahs and rocker arms.
^
The rocker arms must be installed in the same positions if reused.
^
When removing or installing the rocker arm assembly, do not remove the camshaft holder bolts. The bolts will keep the holders, springs, and
rocker arms on the shaft.
^
Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to any contact points.
^
Bundle the rocker arms with rubber bands to keep them together as a set.
^
When replacing the VTEC rocker arm assembly, remove the fastening hardware from the new VTEC rocker arm assembly.
K20A3 engine (2002 model)
