RSX L4-2.0L (2005)
Oil Filter Adapter: Service and Repair
Oil Filter Feed Pipe Replacement
K20A3 Engine
1. Remove the oil filter.
2. Remove the oil filter feed pipe.
3. Install two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe. Hold the nut with a wrench, then tighten the other nut.
4. Tighten the oil filter feed pipe to the block to 49 Nm (5.0 kgf-cm, 36 ft. lbs.), then remove the nuts from the oil filter feed pipe.