RSX L4-2.0L (2005)
22. Clean the crankshaft pulley (A) and pulley bolt (B), and lubricate with new engine oil to the pulley bolt and washer (C).
23. Install the crankshaft pulley, and hold the pulley with holder handle (A) and holder attachment (B).
24. Tighten the bolt to 49 Nm (5.0 kgf-cm, 36 ft. lbs.). with a torque wrench and 19 mm socket (C). Do not use an impact wrench.
25. Tighten the pulley bolt an additional 90°.
26. Install the cylinder head cover.
27. Install the drive belt.
28. Install the splash shield.
29. Install the right front tire/wheel.
30. 2005 model: Do the crankshaft position (CKP) pattern clear/CKP pattern learn procedure.
