RSX L4-2.0L (2005)
8. Remove the locknut (A) and the fuel tank unit.
9. Remove the stop (B). Release the hook (C) and remove the fuel filter (D), the fuel gauge sending unit (E), the case (F), the wire harness (G), and
the fuel pressure regulator (H).
10. When connecting the fuel tank unit, make sure the connection is secure and the suction filter (I) is firmly connected to the fuel pump (J).
11. Install the fuel tank unit in the reverse order of removal with a new locknut, a new base gasket (K) and new O-rings (L), then check these items:
-
When connecting the wire harness, make sure the connection is secure and the connector (M) is firmly locked into the place.
-
When installing the fuel gauge sending unit, make sure the connection is secure and the connector (M) is firmly locked into place. Be careful
not to bend or twist it excessively.
-
When installing the fuel tank unit, align the marks (N) on the fuel tank (0) and the fuel tank unit (P).
