RSX L4-2.0L (2005)
Auxiliary Power Outlet: Service and Repair
Accessory Power Socket Test/Replacement
Front
1. Remove the dashboard center lower cover.
2. Disconnect the 2P connector (A) from the socket (B).
3. Carefully pry the accessory power socket out from the dashboard.
4. Inspect the connector terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 5.
5. Turn the ignition switch ACC (I), and check for voltage between the No. 1 and No. 2 terminals.
-
There should be battery voltage.
-
If there is no battery voltage, check for:
-
Poor ground (G401).
-
An open in the wire.
-
Blown No. 18 (15 A) fuse in the under-dash fuse/relay box.
Rear
1. Remove the rear console cover.
2. Disconnect the 2P connector (A) from the socket.
