RSX L4-2.0L (2005)
9. Disconnect the quick-connect fitting (A): Hold the connector (B) with one hand, and squeeze the retainer tabs (C) with the other hand to release
them from the locking tabs (D). Pull the connector off.
NOTE:
-
To prevent the remaining fuel in the fuel feed line or hose from flowing out, use a rag or shop towel.
-
Be careful not to damage the line (E) or other parts.
-
Do not use tools.
-
If the connector does not move, keep the retainer tabs pressed down, and alternately pull and push the connector until it comes off easily.
-
Do not remove the retainer from the line; once removed, the retainer must be replaced with a new one.
10. After disconnecting the quick-connect fitting, check it for dirt or damage.
11. Reconnect the negative cable to the battery and do the following items:
-
ECM/PCM idle learn procedure.
-
Power window control unit reset procedure.
-
Enter the anti-theft codes for the radio, then enter the customer's radio station presets.
-
Reset the clock.