acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Other Service Bulletins for PROM - Programmable Read Only Memory: > < Computers/Controls - Updating Control Units And Modules|Page 3993
Page 2
background image

Defect Code:

03214

Symptom Code:

03203

Skill Level:

Repair Technician

Out of warranty: 
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.

DIAGNOSIS

Do the normal troubleshooting for DIG P0116 (ECT sensor range/performance problem):

^

Refer to the Fuel and Emissions section of the appropriate service manual or,

^

Online, enter P0116, then select DTC

Troubleshooting: P0116 from the list.

-

If you find a problem, make the necessary repair. This bulletin does not apply.

-

If you do not find any problems, go to REPAIR PROCEDURE.

REPAIR PROCEDURE

Use the HDS to update the ECM/PCM PGM-FI software with software version 2.005.004 or later.

Refer to Service Bulletin 01-026, Updating the ECM/PCM.

Disclaimer

All Other Service Bulletins for PROM - Programmable Read Only Memory: > < Computers/Controls - Updating Control Units And Modules|Page 3993