RSX L4-2.0L (2005)
1. Place the new side airbag on the seat-back frame (A). Tighten the side airbag mounting nut (B).
2. Install the seat-back cover.
3. Install the seat assembly, then connect the side airbag harness 2P connector.
4. Move the seat cushion and the seat-back through their full ranges of movement, making sure the harness wires are not pinched or interfering with
other parts.
5. Reconnect the battery negative cable.
6. After installing the side airbag, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator should come on for about 6
seconds and then go off.
