RSX L4-2.0L (2005)
8. Disconnect the dashboard wire harness 4P connector (A) from the cable reel 4P connector (B), then disconnect the dashboard wire harness 5P
connector (C) from the cable reel (D)
9. Release the lock tab (A) under the cable reel connector with a 90° hook shaped tool (B) Slide the tool below the cable reel connector just above
the lock tab Release the lower lock tab (C), and slide the cable reel off the column
Installation
1. Before installing the steering wheel, align the front wheels straight ahead
2. Disconnect the battery negative cable, and wait at least 5 minutes
3. Set the cancel sleeve (A) so that the projections (B) are aligned vertically.