RSX L4-2.0L (2005)
Alternator: Service and Repair
Replacement
Alternator Replacement
1. Make sure you have the anti-theft codes for the radio, then write down the customer's radio station presets.
2. Disconnect the negative cable from the battery first, then disconnect the positive cable.
3. Remove the drive belt.
4. Remove the auto-tensioner.
5. Remove the three bolts securing the alternator.
6. Disconnect the alternator connector (A) and BLK wire (B) from the alternator.
7. Remove the alternator.
8. Install the alternator and drive belt in the reverse order of removal.
9. Connect the positive cable to the battery first, and then the negative cable.
10. Enter the anti-theft codes for the radio, then enter the customer's radio station presets.
11. Set the clock.
12. Do the engine control module (ECM)/powertrain control module (PCM) idle learn procedure, and the power window control unit reset procedure.
