RSX L4-2.0L (2005)
Starter Motor: Removal and Replacement
This article updated by Service News, September 2006, S/M Fix: Starter Replacement, '02-06 RSX
Starter Removal and Installation
Removal
1. Make sure you have the anti-theft codes for the radio, then write down the customer's radio station presets.
2. Disconnect the negative cable from the battery first, then disconnect the positive cable.
New Step
3. Remove the Intake Manifold.
4. Disconnect the knock sensor connector.
5. K20A3 engine: Disconnect the bolt securing the harness bracket.
6. K20A2, K20Z1 engines: Remove the front subframe damper.
7. K20A2, K20Z1 engines: Remove the bolt (A) securing the harness bracket, then remove the intake manifold brackets (B).