RSX L4-2.0L (2005)
Pressure Regulating Solenoid: Service and Repair
Clutch Pressure Control Solenoid Valve B and C Replacement
A/T Clutch Pressure Control Solenoid Valve B and C Replacement
1. Remove the air cleaner housing.
2. Disconnect the A/T clutch pressure control solenoid valves B and C connectors.
3. Remove the mounting bolts, harness clamp brackets (A), and the A/T clutch pressure control solenoid valves B and C.
4. Remove the ATF joint pipes (D), O-rings (E), and gasket (F).
5. Clean the mounting surface and fluid passages of the A/T clutch pressure control solenoid valves B and C, and transmission housing.
6. Clean the filter of the ATF joint pipes.
7. Install the new gasket on the transmission housing, and install the ATF joint pipes.
8. Install the new O-rings over the ATF joint pipes.
9. Install the new A/T clutch pressure control solenoid valves B and C, and harness clamp brackets.
10. Check the A/T clutch pressure control solenoid valves B and C connectors for rust, dirt, or oil, and clean if necessary, then connect them securely.
11. Install the air cleaner housing.
