RSX L4-2.0L (2005)
Fluid - A/T: Service and Repair
ATF Level Check
ATF Level Check
NOTE: Keep all foreign particles out of the transmission.
1. Warm up the engine to normal operating temperature (the radiator fan comes on).
2. Park the vehicle on level ground, and turn the engine off.
NOTE: Check the fluid level within 60 - 90 seconds after turning the engine off.
3. Remove the dipstick (yellow loop) (A) from the transmission, and wipe it with a clean cloth.
4. Insert the dipstick back into the transmission.
5. Remove the dipstick (A) and check the fluid level. It should be at upper mark (B).
6. If the level is below the upper mark, check for fluid leaks at the transmission, hose and line joints, and cooler lines. If the level is an excess, drain
the ATF to proper level.
7. Pour the recommended fluid amount into the dipstick hole to bring it to the upper mark. Always use Honda ATF-Z1 Automatic Transmission Fluid
(ATF). Using a non-Honda ATF can affect shift quality.
