RSX L4-2.0L (2005)
Shifter A/T: Service and Repair
Shift Lever Removal
Shift Lever Removal
1. Remove the center console.
2. Shift the transmission into the N position.
3. Remove the nut securing the shift cable end, then separate the cable end from the shift lever.
4. Rotate the socket holder (A) on the shift cable (B) a quarter turn; the tab (C) on the socket holder will be in the opening of the shift lever bracket
base (D). Then slide the holder to remove the shift cable from the shift lever bracket base (D). Do not remove the shift cable by twisting the shift
cable guide (E).
5. Disconnect transmission gear selection switch/park pin switch connector (A) and shift lock solenoid connector (B).
6. Remove the shift lever assembly.
