RSX L4-2.0L (2005)
3. Install the flywheel on the crankshaft, and install the mounting bolts, finger-tight.
4. Install the special tool, then torque the flywheel mounting bolts in a crisscross pattern in several steps.
Clutch Disc and Pressure Plate Installation
1. Temporarily install the clutch disc onto the splines of the transmission mainshaft. Make sure the clutch disc slides freely on the mainshaft.
2. Install the ring gear holder.
3. Apply a light coat of super high temp urea grease (P/N 08798-9002) to the crankshaft pilot bushing (A).
4. Apply super high temp urea grease (P/N 08798-9002) to the splines (B) of the clutch disc (C), then install the clutch disc using the special tools.
5. Install the pressure plate (A) and the mounting bolts (B), finger-tight.
