RSX L4-2.0L (2005)
Fluid Pressure Sensor/Switch: Service and Repair
2ND Clutch Pressure Switch Replacement
2nd Clutch Transmission Fluid Pressure Switch Replacement
1. Remove the air cleaner housing.
2. Disconnect the connector from the 2nd clutch transmission fluid pressure switch (A).
3. Remove the 2nd clutch transmission fluid pressure switch, then install a new one with a new sealing washer (B). Tighten the switch to the specified
torque.
4. Reconnect the connector, making sure there is no water, oil, dust, or foreign particles inside the connector.
5. Install the air cleaner housing.
