RSX L4-2.0L (2005)
Back Window Glass: Service and Repair
Rear Window Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Wear eye protection when removing the glass with piano wire.
-
Use seat covers to avoid damaging any surfaces.
-
Do not damage the rear window defogger grid lines, window antenna grid lines, and terminals.
1. Remove these items:
-
Hatch trim panel
-
Rear window wiper motor
2. Remove the window antenna terminal cover (A) from the window antenna terminal base (B), and disconnect the window antenna connector (C).
Disconnect the rear window defogger connectors (D).
3. Remove the rear window trim (E).
4. If the old rear window will be reinstalled, make alignment marks across the glass and body with a grease pencil.
5. Apply protective tape along the inside and outside edges of the hatch. Using an awl, make a hole through the adhesive from inside the vehicle at
the corner portion of the rear window. Push the piano wire through the hole, and wrap each end around a piece of wood.