RSX L4-2.0L (VTEC) (2002)
Brake Pad: Service and Repair
Front
Replacement
1. Remove the bolt (A), and pivot the caliper (B) up out of the way. Check the hose and pin boots for damage and deterioration.
2. Remove the pad shims (A) and parts (B).
3. Remove the pad retainers (A).
4. Clean the caliper thoroughly; remove any rust, and check for grooves and cracks.
5. Check the brake disc for damage and cracks.
6. Apply Dow Corning Molykote M77 grease to the retainers on their mating surfaces against the caliper bracket.
7. Install the pad retainers. Wipe excess grease off the retainers. Contaminated brake discs and pads reduce stopping ability. Keep grease off the discs
and pads.