RSX L4-2.0L (VTEC) (2002)
Water Pump: Service and Repair
Water Passage Replacement
Installation
1. Clean and dry the water passage mating surfaces.
2. Apply liquid gasket, P/N 08718-0009, evenly to the cylinder block mating surface of the water passage and to the inner threads of the bolt holes.
NOTE: Do not install the parts if 5 minutes or more hove elapsed since applying liquid gasket. Instead, reapply liquid gasket after removing old
residue.
3. Install the water passage (A) with a new O-ring (B).
K20A3
K20A2
4. After assembly, wait at least 30 minutes before filling the engine with oil.