acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Customer Interest for Variable Valve Timing Solenoid:|02-035|Page 2427 > < How to Replace Connector Terminals|Page 2421
Page 1
background image

Variable Valve Timing Solenoid: Customer Interest
Engine Controls - MIL ON/DTC P0341 Set

02-035

November 25, 2002

Applies To: 
2002 RSX - ALL

MIL Comes On With DTC P0341

SYMPTOM

The MIL is on, and DTC P0341 [variable valve timing control (VTC) phase gap] is set.

PROBABLE CAUSE

The VTC control solenoid valve is temporarily stuck or contaminated.

CORRECTIVE ACTION

Update the ECM/PCM software using the Honda Interface Module (HIM), and if necessary, replace the VTC control solenoid valve.

TOOL INFORMATION

You will need these tools and equipment items:

^

Interactive Network (iN) CD (December 2002 or later)

^

iN Workstation

^

Honda Interface Module (HIM): T/N EQS05A35570

^

PC Interface Cable (RS232): T/N VET-02002832 This is the same cable you use to connect the PGM Tester to the Interactive Network (iN)
workstation when updating the PGM Tester program card or downloading DTCs to American Honda. The cable is blue with an attached adapter.

^

AC Adapter (110 VAC/12 VDC Power Supply): T/N VET-02002426

This is the same adapter used by the PGM Tester. These tools are already at your dealership. To order additional HIMs, interface cables, or AC adapters,
call the Acura Tool and Equipment Program. 

PARTS INFORMATION

VTC Control Solenoid Valve:

P/N 15830-PNB-003

WARRANTY CLAIM INFORMATION

In warranty: 
The normal warranty applies.

Failed Part:

P/N 37820-PND-A55

Defect Code:

072

Contention Code:

B03

Customer Interest for Variable Valve Timing Solenoid:|02-035|Page 2427 > < How to Replace Connector Terminals|Page 2421