RSX L4-2.0L (VTEC) (2002)
3. Carefully pry the accessory power socket (B) out from the rear console cover.
4. Inspect the connector terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 5.
5. Turn the ignition switch ACC (I), and check for voltage between the No.1 and No.2 terminals.
-
There should be battery voltage.
-
If there is no battery voltage, check for:
-
poor ground (G401, 501).
-
an open in the wire.
-
blown No.18 (15 A) fuse in the under-dash fuse/relay box.
-
blown No.3 (10 A) fuse in the under-dash fusel relay box.
-
faulty rear accessory power socket relay.