acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Malfunction Indicator Lamp|Locations|Page 4545 > < Malfunction Indicator Lamp|Locations|Page 4543
Page 6
background image

32. Reinstall PGM-FI main relay 2(A).

33. Check for continuity between the fuel pump 5P connector terminal No.5 and body ground.

Is there continuity?

YES - Replace PGM-FI main relay 2. Also replace the No.17 FUEL PUMP (15A) fuse.

NO - Check the fuel pump, and replace it if necessary. Also replace the No.17 FUEL PUMP (15A) fuse.

34. Disconnect ECM/PCM connector E (31P).
35. Turn the ignition switch ON (II).

36. Measure voltage between ECM/PCM connector terminal E9 and body ground.

Is there battery voltage?

YES - Go to step 37.

NO -  Repair open in the wire between the No.17 FUEL PUMP (15A) fuse and the ECM/PCM (E9).

37. Turn the ignition switch OFF.

Malfunction Indicator Lamp|Locations|Page 4545 > < Malfunction Indicator Lamp|Locations|Page 4543