acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

How to Replace Connector Terminals|Page 5228 > < How to Replace Connector Terminals|Page 5226
Page 3
background image

YES - Replace the speedometer assembly.

NO - Repair open in the BLU/WHT [WHT/GRN] wire between the VSS and the speedometer.

A/T:

Before testing, check the No.9 (7.5 A) fuse in the under-hood fuse/relay box and the No.10 (7.5 A) fuse in the under-dash fuse/relay box.

1. Start the engine and check the Malfunction Indicator Lamp (MIL).

Does the MIL come on?

YES - Troubleshoot the PCM DTC, and recheck.

NO - Go to step 2.

2. Check the multiplex control unit DTC.

Is the DTC indicated?

YES - Troubleshoot the DTC, and recheck.

NO - Inspect the connector and socket terminals of the gauge assembly connectors. If the terminals look OK, replace the gauge assembly. 

How to Replace Connector Terminals|Page 5228 > < How to Replace Connector Terminals|Page 5226