acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Emission Control Systems > < Voltage Signal|Testing and Inspection
Page 2
background image

13. Check for continuity between body ground and ECM/PCM connector terminal B13.

Is there continuity?

YES - Test the alternator.

NO - Repair open in the wire between the ECM/PCM (B13) and the alternator.

14. Turn the ignition switch OFF.
15. Disconnect the negative cable from the battery.
16. Disconnect ECM/PCM connector B (24P).

17. Check for continuity between body ground and ECM/PCM connector terminal B13.

Is there continuity?

YES - Repair short in the wire between the ECM/PCM (B13) and the alternator.

NO -  Update the ECM/PCM if it does not have the latest software, or substitute a known-good ECM/PCM, then recheck. If the
symptom/indication goes away with a known-good ECM/PCM, replace the original ECM/PCM.

Emission Control Systems > < Voltage Signal|Testing and Inspection