RSX L4-2.0L (VTEC) (2002)
8. Disconnect the dashboard wire harness B 4P connector (A) from the cable reel 4P connector (B), then disconnect the dashboard wire harness B 5P
connector (C) from the cable reel (D).
9. Release the tab (A), then remove the cable reel from the column.
Installation
1. Before installing the steering wheel, align the front wheels straight ahead.
2. If not already done, disconnect the battery negative cable, and wait at least 3 minutes.
3. Set the cancel sleeve (A) so that the projections (B) are aligned vertically.