acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Technical Service Bulletins for Seat Occupant Sensor:|06-008|Page 10057 > < All Technical Service Bulletins for Seat Occupant Sensor:|06-008|Page 10055
Page 2
background image

Does the SIDE AIRBAG OFF indicator come on and stay on or blink intermittently?

Yes - Go to REPAIR PROCEDURE. 

No - Go to step 2.

2.

Ask your customer about the condition of the seat when the indicator came on.

Was there anything on the seat cushion; was the seat-back wet; or was an aftermarket seat cover; cushion, or backrest installed?

Yes - Return the vehicle to your customer. Advise him or her (1) to make sure the front seat passenger is sitting up properly in the seat, (2) to keep
objects (grocery bags, brief cases, laptop computers) off the front passenger's seat cushion, (3) to avoid getting the front passenger's seat-back wet,
and (4) to never use aftermarket seat covers, cushions, or backrest on the front seats.

No - Go to REPAIR PROCEDURE.

REPAIR PROCEDURE

1.

Make sure you have the anti-theft code for the radio, then write down your customer's radio station presets.

2.

Turn the ignition switch to LOCK (0).

3.

Disconnect the negative battery cable, then wait at least 3 minutes before you start work.

4.

Unzip the two seat cover zippers on the back of the front passenger's seat.

5.

Pull back the seat-back cover from the left side bolster to give you access to the OPDS unit cover.

6.

Remove the OPDS unit cover from the seat frame (three clips).

7.

Recline the seat-back to give you access to the two OPDS unit mounting screws.

All Technical Service Bulletins for Seat Occupant Sensor:|06-008|Page 10057 > < All Technical Service Bulletins for Seat Occupant Sensor:|06-008|Page 10055