RSX L4-2.0L (VTEC) (2002)
Fuel Gauge Sender: Service and Repair
Fuel Pump/Fuel Gauge Sending Unit Replacement
Special Tools Required
Fuel sender ring wrench 07XAA-001010A
1. Relieve the fuel pressure.
2. Remove the fuel fill cap.
3. Remove the rear seat cushion.
4. Remove the access panel (A) from the floor.
5. Disconnect the fuel pump 5P connector (B).
6. Disconnect the quick-connect fitting (C) from the fuel tank unit.
7. Using the tool, loosen the fuel tank unit locknut (A).