RSX L4-2.0L (VTEC) (2002)
/Page-4212002.png)
-
Driver handle 07NAD-SR30101
-
Seal slider 07974-6890801 or 07974-689080A
-
Valve seal ring guide 07ZAG-S5A0200
-
Pincers, Oetiker 1098 or equivalent, commercially available.
NOTE: Refer to the Exploded View as needed during this procedure.
Removal
1. Remove the steering gearbox.
Disassembly
2. Remove cylinder lines (A) from the gearbox.
3. Drain the fluid from the cylinder fittings by slowly moving the steering rack back and forth.
4. Unbend the lock washer (A).
5. Hold the bracket (A) with one wrench, and unscrew both rack ends (B) with another wrench. Remove the lock washers.
