RSX L4-2.0L (VTEC) (2002)
63. Mark (A) a position on the steering rack surface with a felt-tip marker, 14.5 mm (0.57 inch) from the rack end edges.
64. Grease the steering rack teeth, then insert the steering rack (A) into the cylinder (B). Be careful not to damage to inner surface of the cylinder wall
and bushing with the rack edges.
65. Set the cylinder (A) in a press, then press the cylinder end seal (B) into the bottom of the cylinder until the mark (C) on the rack meets the edges
(D) of the cylinder.