RSX L4-2.0L (VTEC) (2002)
74. Hold the gearbox housing using a C-clamp (A) and the wooden block (B).
75. Push the cylinder (A) into the gearbox housing (B) so the notch (C) is aligned with the pin (D) inside of the gearbox housing.
76. Tighten the lock screw (A) by hand first, then install the special tool (B) on the lock screw. Lightly tighten the lock screw. Do not tighten the lock
screw to specified torque yet.
77. Remove the special tool.