RSX L4-2.0L (VTEC) (2002)
/Page-4213004.png)
12. Install the return hose clamp (A) and feed line clamp (B) on the left side of the gearbox.
13. Install the return hose clamp (A) and feed line clamp (B) on the right side of the gearbox.
14. Wipe off any grease contamination from the ball joint tapered section and threads. Then reconnect the tie-rod end (A) to the damper steering arms.
Install the 12 mm nut (B) and tighten it.
15. Install a new cotter pin (C), and bend it (D) or (E).
