RSX L4-2.0L (VTEC) (2002)
/Page-4250001.png)
Wheel Bearing: Service and Repair
Front
Knuckle/Hub/Wheel Bearing Replacement
Special Tools Required
-
Hub disassembly tool 07GAF-SD40100
-
Ball joint remover, 28 mm 07MAC-SL00200
-
Attachment 62 x 68 mm 07746-0010500
-
Driver 07749-0010000
-
Support base 07965-SD90100
1. Raise the front of the vehicle, and make sure it is securely supported.
2. Remove the wheel cap, wheel nuts, and front wheel.
