RSX L4-2.0L (VTEC) (2002)
Differential: Mechanical Specifications
ATF pump
ATF pump thrust clearance
Standard or new
0.03 - 0.05 mm
Service limit
0.07 mm
ATF pump gear-to-body clearance Drive gear
Standard or new
0.210 - 0.265 mm
Drive gear
Standard or new
0.070 - 0.125 mm
ATF pump driven gear I.D.
Standard or new
14.016 - 14.034 mm
Service limit
When worn or damaged
ATF pump driven gear shaft O.D.
Standard or new
13.980 - 13.990 mm
Service limit
When worn or damaged
Stator shaft
Needle bearing contact I.D.
Torque converter side Standard or new
27.000 - 27.021 mm
Service limit
When worn or damaged
ATF pump side
Standard or new
29.000 - 20.921 mm
Sealing ring contact area I.D.
Standard or new
29.000 - 20.921 mm
Service limit
29.05 mm
Reverse shift fork
Fork finger thickness
Standard or new
5.90 - 6.00 mm
Service limit
5.40 mm
Park gear and pawl
Service limit
When worn or damaged
Servo body
Shift fork shaft bore I.D.
Standard or new
14.000 - 14.010 mm
Shift fork shaft valve bore I.D.
Standard or new
37.000 - 37.039 mm
Service limit
37.045 mm
Regulator valve body
Sealing ring contact I.D.
Standard or new
29.000 - 29.021 mm
Service limit
29.05 mm
Main valve body springs
Shift valve A spring
Wire diameter
Standard or new
0.8 mm
O.D.
Standard or new
5.6 mm
Free length
Standard or new
28.1 mm
No.of coils
Standard or new
15.9
Shift valve B spring
Wire diameter
Standard or new
0.8 mm
O.D.
Standard or new
5.6 mm
Free length
Standard or new
28.1 mm
No. of coils
Standard or new
15.9