RSX L4-2.0L (VTEC) (2002)
Service limit
0.12 mm
Intermediate shaft contact I.D.
Standard or new
28.015 - 28.045 mm
Carrier-to-intermediate shaft clearance
Standard or new
0.065 - 0.111 mm
Service limit
0.12 mm
Carrier bearing starting torque (preload)
For new bearing
Standard or new
2.7 - 3.9 Nm
Service limit
Adjust
For bearing reused
Standard or new
2.5 - 3.6 Nm
Service limit
Adjust
Final driven gear backlash
(references)
Standard or new
0.087 - 0.146 mm
Service limit
0.2 mm
A/T differential pinion gear
Backlash
Standard or new
0.05 - 0.15 mm
I.D.
Standard or new
18.042 - 18.066 mm
Pinion gear-to-pinion shaft clearance
Standard or new
0.055 - 0.095 mm
Service limit
0.12 mm