acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Customer Interest for Clutch Pedal Assembly:|04-011|Page 7158 > < Clutch Slave Cylinder|Service and Repair|Page 7152
Page 1
background image

Clutch Pedal Assembly: Customer Interest
M/T - Squeak at the Clutch Pedal

04-011

April 6, 2004

Applies To: 
2002-03 RSX - ALL
2004 RSX - From VIN JH4DC538.4S000001 thru JH4DC538.4S001033

Squeak at the Clutch Pedal

SYMPTOM

A squeak, a twang, or a notchy feel when the clutch pedal is pressed.

PROBABLE CAUSE

The clutch master cylinder spring is rubbing on the outer diameter of the piston when the pedal is pressed, or the master cylinder quick connect is
moving.

CORRECTIVE ACTION

Replace the master cylinder, and apply a thin film of silicone grease to the clutch line fitting.

REQUIRED MATERIALS

Silicone Grease: P/N 08C30-B0234M

Honda Genuine DOT 3 Brake Fluid: P/N 08798-9008

PARTS INFORMATION

Master Cylinder: P/N 46920-S7A-A02

WARRANTY CLAIM INFORMATION

In warranty: 
The normal warranty applies.

Operation Number:

211101

Flat Rate Time:

0.6 hour

Failed Part:

P/N 46920-S5A-G01

Defect Code:

03214

Symptom Code:

04201

Skill Level:

Repair Technician

Out of warranty: 
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.

DIAGNOSIS

Have an assistant press the clutch pedal while you grasp the clutch line at the clutch master cylinder and then at the slave cylinder. If you feel a vibration
through the clutch line when you hear the noise or the noise stops, go to REPAIR PROCEDURE. If you feel no vibration or the noise does not stop, look
for other causes.

REPAIR PROCEDURE

NOTICE

Customer Interest for Clutch Pedal Assembly:|04-011|Page 7158 > < Clutch Slave Cylinder|Service and Repair|Page 7152