RSX L4-2.0L (VTEC) (2002)
/Page-3542001.png)
Countershaft: Specifications
Countershaft
Diameter of needle bearing contact area (clutch housing side)
Standard or new
40.000 - 40.015 mm
Service limit
39.95 mm
Diameter of distance collar contact area
Standard or new
39.937 - 39.950 mm
Service limit
39.883 mm
Diameter of ball bearing contact area (transmission housing side)
Standard or new
30.020 - 30.033 mm
Service limit
29.97 mm
Runout
Standard or new
0.02 mm <aximum
Service limit
0.05 mm
35 mm shim-to-bearing inner race clearance
Standard or new
0.04 - 0.10 mm
Service limit
Adjust
Countershaft 1st gear
I.D.
Standard or new
52.010 - 52.029 mm
Service limit
52.08 mm
End play
Standard or new
0.06 - 0.16 mm
Service limit
0.25 mm
Thickness
Standard or new
22.92 - 22.97 mm
Service limit
22.87 mm
Countershaft 2nd gear
I.D.
Standard or new
52.010 - 52.029 mm
Service limit
52.08 mm
End play
Standard or new
0.06 - 0.16 mm
Service limit
0.25 mm
Thickness
Standard or new
27.92 - 27.97 mm
Service limit
27.87 mm
Countershaft 1st gear distance collar
I.D.
Standard or new
39.95 - 39.96 mm
Service limit
39.97 mm
O.D.
Standard or new
46.989 - 47.000 mm
Service limit
46.94 mm
Length
Standard or new
23.03 - 23.08 mm
Countershaft 2nd gear distance collar
I.D.
Standard or new
39.95 - 39.96 mm
Service limit
39.97 mm
