RSX L4-2.0L (VTEC) (2002)
/Page-3543001.png)
Differential: Specifications
M/T differential carrier
Pinion shaft contact area I.D.
Standard or new
18.010 - 18.028 mm
Carrier-to-pinion shaft clearance
Standard or new
0.027 - 0.057 mm
Service limit
0.1 mm
Driveshaft contact area I.D.
Standard or new
28.025 - 28.045 mm
M/T differential pinion gear Backlash
Standard or new
0.05 - 0.15 mm
I.D.
Standard or new
18.042 - 18.066 mm
Pinion gear-to-pinion shaft clearance
Standard or new
0.059 - 0.095 mm
Service limit
0.15 mm
80 mm shim
80 mm shim-to-bearing outer race clearance in transmission housing
Standard or new
0 - 0.10 mm
Service limit
Adjust
