RSX L4-2.0L (VTEC) (2002)
/Page-3554001.png)
Mainshaft: Specifications
Mainshaft
End play
Standard or new
0.11 - 0.17 mm
Service limit
Adjust
Diameter of bushing surface
Standard or new
20.80 - 20.85 mm
Service limit
20.75 mm
Diameter of distance collar
Standard or new
31.984 - 32.000 mm
Service limit
31.93 mm
Diameter of ball bearing contact area
Standard or new
27.977 - 27.990 mm
(clutch housing side)
Service limit
27.92 mm
Diameter of needle bearing contact area
Standard or new
38.984 - 39.000 mm
Service limit
38.93 mm
Diameter of ball bearing contact area
Standard or new
27.987 - 28.000 mm
(transmission housing side)
Service limit
27.93 mm
Runout
Standard or new
0.02 mm Maximum
Service limit
0.05 mm
Mainshaft 3rd, 4th and 5th gears
I.D.
Standard or new
44.009 - 44.025 mm
Service limit
44.08 mm
End play
Standard or new
0.06 - 0.16 mm
Service limit
0.25 mm
Thickness
Standard or new
23.92 - 23.97 mm
Service limit
23.80 mm
Mainshaft 6th gear
I.D.
Standard or new
40.009 - 40.025 mm
Service limit
40.08 mm
End play
Standard or new
0.06 - 0.16 mm
Service limit
0.25 mm
Thickness
Standard or new
23.92 - 23.97 mm
Service limit
23.80 mm
Mainshaft 4th and 5th gears distance
I.D.
Standard or new
32.00 - 32.01 mm
collar
Service limit
32.02 mm
